How to Edit Provider

You are here:

1. Open the Providers page.
 

2. Click a provider name to open its details page.

  • NOTE: Configuration options may differ for some providers.

 


 

3. Select the Auto start checkbox to enable the option.

  • • If enabled, the provider starts automatically when Trapeze is started or restarted.

 

4. Select the Automatically save discovered devices checkbox to enable the option.

  • • If enabled, Trapeze automatically saves discovered devices with default configuration.
  • NOTE: Perform manual device discovery is not available while Automatically save discovered devices option is enabled.

 

5. Select the Synchronize time for automatically discovered devices checkbox to enable the option.
 

6. In the Discovery timeout field type in a time interval (in seconds) to specify how long should the should the provider discovery process wait for devices to respond.
 

7. In the Discovery repeat period field type in a time interval (in seconds) to specify how often should the discovery process be repeated.
 

8. Select the Binding interface field to type in the IP address of Trapeze server.

  • • Binding interface is unnecessary for most providers.

 

9. In the Device URI default port field type in the port to which the device connects to.
 

10. Click the Update button to apply the changes.